This DIY guide helps how to replace GPS antenna replacement part on collar Garmin DC 50.


What you need:
1. Replacement part GPS Antenna ( SKU: GP08030)
2. Sealant with dispencing tip ( SKU: GP07043)
3. Screwdriver PH2



1. Unscrew 4 screw that hold protection cover



2. Take of protection plate cover.



3. Clear sealant (red arrow), unscrew 2 small screw that hold GPS antenna


4. Pull up brass GPS connector with carefully.


5. Connect new GPS antenna

Step-by-step DIY manual:

1. Power off unit, Unscrew 4 screw
2. Take of protection plate cover.
3. Clear sealant (red arrow), unscrew 2 small screw that hold GPS antenna
4. Pull up brass GPS connector with carefully.
5. Connect new GPS antenna
6. Fill spacing around GPS brass connector by sealant to prevent water damage.
7. Assemble in reverse order.